First steps
You've come to the right place if you've just bought your Mr Beam. These articles will tell you where to start.
Are you a new owner of a Mr Beam? In this article we give you an overview of the most important topics to get you through the basic to get you started with ...
Thu, 28 Mar, 2024 at 11:58 AM
The Mr Beam arrives fully assembled, calibrated, and ready to use. All you need for the first laser job is a computer and a pre-installed Google Chrome. You...
Thu, 28 Mar, 2024 at 2:54 PM
Yes, Mr Beam has a manual focus which must be adjusted according to the height of the material. The laser beam has a very steep angle, meaning the laser res...
Tue, 4 Jul, 2023 at 1:47 PM
Mr Beam can process SVG, JPG, PNG, GIF, BMP, PCX and DXF. Pixel based graphics (JPG, PNG, BMP, PCX) can be engraved but not cut. Vector graphics (SVG...
Thu, 14 Apr, 2022 at 10:36 AM
Mr Beam can be used entirely offline. One of the options to connect your computer with Mr Beam is through the WiFi hotspot created by your Mr Beam...
Fri, 25 Mar, 2022 at 4:43 PM
Connection options with Mr Beam There are three options to connect Mr Beam to your computer or tablet. Choosing the most appropriate option depends on your...
Thu, 21 Dec, 2023 at 2:44 PM
Status Lights Whether it is your first time setting up your Mr Beam or whether you have been connected to it many times, the Mr Beam Status Lights show yo...
Thu, 12 Oct, 2023 at 3:10 PM
We created find.mr-beam.org as an online service to help you to you find your Mr Beam device on your computer within your local network. Please keep in mind...
Wed, 20 Apr, 2022 at 1:42 PM
On your computer, select the Wi-Fi network with the name of your Mr Beam: „MrBeam-XXXX“. XXXX stands for your specific device name, which is located o...
Thu, 21 Dec, 2023 at 2:48 PM
Connect your Mr Beam to your router with a network cable (Ethernet). The network socket is located on the back under the USB ports. Important: do n...
Wed, 22 Jun, 2022 at 3:51 PM