On your computer, select the Wi-Fi network with the name of your Mr Beam: „MrBeam-XXXX“.

XXXX stands for your specific device name, which is located on the back of your Mr Beam.

The password for the Wi-Fi connection is: mrbeamsetup.

Note: The Mr Beam sets up a WLAN access point. However, this is not the same as an Internet connection. While you are connected to the Mr Beam Wi-Fi access point, you have no internet access and therefore no access to the Designstore. To use this, you must connect to the Mr Beam using option B or option C.

Enter the following IP address in the search bar of your Google Chrome browser to load the web


Tip: During the initial setup, your Mr Beam will guide you through the Mr Beam Welcome Dialogue. There you can set up a connection to your home Wi-Fi if you wish. Alternatively, you can also set this up later in the settings under "Network connection".

Here is a short video in German on how to connect your Mr Beam with your computer: