If you haven't found what you're looking for in this category, we've linked some related articles or categories here that might help you. 

Hardware and Software usage

In this articles we will show you some of the most important functions, but also tips and tricks on how you can use your laser cutter even more efficiently.

Software Support
The Mr Beam software has a lot of features to enhance your experience. To keep it that way, we've already solved potential problems here.

Maintenance and hardware support

To ensure that your Mr Beam always works perfectly, minor maintenance work needs to be carried out from time to time. If something does go wrong, you've also come to the right place.

Problems with cutting performance and burned edges - Check compressor

If you have problems with the cutting performance or your Mr Beam produces more smoke marks than normal, your compressor may be clogged. In this article, we explain how you can check this.

Camera Calibration: General information

The article on camera calibration introduces you to the topic. From there, you will be taken to the exact steps required for camera calibration.

Laser head constantly pauses for cooling

If you get the message that your laser head needs a cooling break more often than usual, we have listed some reasons for this in this article. We also show you how you can avoid this.