Hardware and software usage
In this articles we will show you some of the most important functions, but also tips and tricks on how you can use your laser cutter even more efficiently.
Why do I need to focus the laser head? To achieve the best results with your Mr Beam, the distance between the lower edge of the laser head and the upper...
Wed, 13 Apr, 2022 at 5:06 PM
Up to a certain hight curving itself is not a big problem. When cutting or engraving, the laser tolerates the difference in height approx. up to 3-4 mm. If ...
Thu, 14 Apr, 2022 at 12:55 PM
1. What is the point of adjusting the working height? The higher the object, the closer it is to the camera in the protective cover of your Mr Beam. This c...
Mon, 21 Aug, 2023 at 12:02 PM
For rough placement of your designs, you can always move it directly with the mouse. However, sometimes it is necessary to place, move or adjust individual ...
Fri, 29 Sep, 2023 at 1:23 PM
In this tutorial we are going to show you how to position your laser file precisely on the Mr Beam working area, if you need alignment which is accurate t...
Tue, 12 Apr, 2022 at 2:07 PM
Positioning with the Mr Beam II camera is easy and quite accurate, sometimes though there might be a small deviation of up to +/- 5mm. If a laser job needs ...
Wed, 20 Apr, 2022 at 3:51 PM
Users privacy and independence are very important to us. Therefore, your design files will not be transferred either to the Mr Beam Lasers or any other serv...
Thu, 14 Apr, 2022 at 12:58 PM
If you haven't found what you're looking for in this category, we've linked some related articles or categories here that might help you. Firs...
Thu, 21 Dec, 2023 at 3:19 PM