This article is intended for users who have received the SIG file for the following support sticks: fix_s_series.
You have received a file called mrbeam_usb_mount_fix_s_series.sig from our support team.
This article describes how to use this file with a USB-Stick on you Mr Beam device.
How to use them: 3 easy steps
ATTENTION: Any running laser jobs will be cancelled.
1. In a USB stick: create a folder called mrbeam and copy the SIG file there.
Requirements for the USB stick:
2. Plug the USB stick into your Mr Beam. After a few seconds you will see a white light pattern.
3. Once the Mr Beam switches to bright green light, unplug the USB stick.
IMPORTANT: Do NOT power off your device now!
Your Mr Beam will restart now and after a few seconds it will switch to green breathing Lights.
You can now connect to your Mr Beam as described in the Quickstart Guide using one of the three options A,B or C.
Do you need more help? Please check our Support Stick Troubleshooting Guide.