What does the "network_reset" stick do?

The "network_reset" USB stick resets the network configuration, including all saved Wi-Fi passwords. It also restores configuration files that may have become corrupted.
As a result, your Mr Beam II will switch back to Access Point mode.

You can download the "network_reset" file from the Mr Beam website’s download section or by clicking here.


How to use them: 3 easy steps

ATTENTION: Any running laser jobs will be cancelled.


1. In a USB stick: create a folder called mrbeam and copy the SIG file there.
Requirements for the USB stick:
  • at least 100 MB free disk space
  • USB 2.0 compatible
  • FAT32 formatted
  • Only one SIG file on the stick
  • Please read this article for more details
2. Plug the USB stick into your Mr Beam II. After a few seconds you will see a white light pattern.
3. Once the Mr Beam II switches to bright green light, unplug the USB stick.

Estimated run time: < 30 seconds.


Done! Your Mr Beam II will restart now, after that you can start to use it again by connecting in one of the following ways: 

  • Via Ethernet cable.
  • Via WiFi Access Point: connecting to the network MrBeam-XXXX (your Mr Beam II's name) with the password mrbeamsetup.

Do you need more help? Please check our Support Stick Troubleshooting Guide.